Skip to main content

Installation Guide | Branch Router (Brick And Mortar Only)

Installation of the UniFi Dream Router

Updated over a week ago

This guide walks you through the physical installation of the UniFi Dream Router for your restaurant’s internet setup. Once installed, a Snackpass support agent will complete the remote configuration.


What's In the Box

Your UniFi Dream Router package should include:

  • 1x UniFi Dream Router (UDR)

  • 1x Power Adapter

  • 1x Ethernet Cable

Step-By-Step Installation

1. Unbox The Equipment

Carefully remove the router and accessories from the packaging. Make sure all components are present before proceeding.

2. Power On The Router

  • Plug the power adapter into the UniFi Dream Router

  • Connect it to a power outlet

  • Wait several minutes while the device boots up

3. Connect To The Restaurant's Modem

  • Locate your restaurant’s main modem

  • Use the included Ethernet cable to connect:

    • Modem LAN portUDR WAN port
      (The WAN port is the bottom port on the back of the UniFi Dream Router)


      Indicator Light:
      The router is ready when the LED ring on the front alternates between dim and bright white.



      Once the white light becomes steady, it is ready for adoption.


4. Contact Snackpass Support

Once the router has finished booting and the light is steady white:

  • Contact Snackpass Support to finalize the installation and complete remote configuration:

    • Phone: +1 (866) 868-2146

    • Partner App: Message us directly

Did this answer your question?