Remove the tablet from its box.

Connect the USB-C charger to the tablet and plug it into a power outlet.

Wait for the tablet to charge or ensure it has sufficient power, then use the side buttons to turn it on.

Once the tablet is powered on, click on the gear icon on the upper right corner to access settings.
​

Select OPEN WIFI SETTINGS , and then click on your network to connect to it.
​

Go back to SETTINGS and select the PRINTER tab under DEVICE.
​

Make sure your receipt printer is powered on.

Your printer should already be shown on this screen ready to be connected if the printer's on.
​

Click CONNECT and use the TEST PRINT button to ensure the printer is working correctly.
​

Once the printer is connected, go back to SETTINGS.

In the SETTINGS menu, scroll down the left-side menu to EXPERIMENTAL.
​

​

Toggle off the ENABLE CARD READER option and confirm to restart the app.
​

​

After the app restarts, sign in using your employee PIN. If you haven’t set up PINs yet, use 1234.
​

​

Once everything is set up, and the app has restarted, use the homescreen icons in the the tablet to switch to the Orders or KDS (Kitchen Display System) app for managing orders.
​

​